In Stock and Ready to Ship
Introducing Klarna Financing for Kabuki Strength customers! During checkout, select "Slice it with Klarna" and continue checking out. 6 month and 12 month financing options are available on orders over $299 and $799, respectively. They also offer 0% interest* for qualified buyers (if paid in full within 6 or 12 months)
|Product Weight||Bar: 55 LB
Attachment: 4.7 LB
|Length||96" (Total Bar)|
|Steel Type||195 KSI Steel|
|Other Specs||19.25" Sleeves
Oil Impregnated Bronze Bushings
2000LB Load Capacity
Attachment point for accessories (Industry First)
|Manufactured||United States of America (Portland, Oregon)|
The Duffalo Performance Squat and Bench bar is the ultimate bar for squatting and bench pressing, correctly, safely, and for performance. We honestly believe that outside of competition, every lifter would benefit from using the Duffalo Bar vs. a standard barbell. This is a bold claim to make, we know, but we hope you'll continue reading on as we explain.
Included with your purchase:
Our proprietary bends allows scapular retraction and also reduce stress on the easily irritated Bicep tendon in the shoulder. It does so while eliminating the counter productive center peak on similar bars. Reducing direct strain on the bicep tendon plus allowing increased back rigidity and proper joint centration through scapular retraction are incredibly important. Additionally our bar improves the ability to improve core stability and conversely improves lumbar stability.
All of this adds up to removing pain, injury risks, and allows you to focus on the lift. Over time and you will see increased performance and increased longevity of your lifting or athletic career.
If you train the squat in your athletic development this bar is a must! Even if you compete in barbell sports requiring a straight bar you should be using this bar up till the final weeks of training for a meet to preserve your shoulders.
The Duffalo bar is THE primary bar we use in training with out team and I highly encourage its use year round up till the final 3-4 weeks prior to a meet.
- Donnie MR3000 Thompson - Champion Powerlifter and Movement Guru
Our proprietary bends optimize the wrist angle when held in the pressing positions. This positioning cues proper joint centration in the shoulder while also improving both lat and scapular engagement. Despite the increased ROM of the press users report significantly reduced (eliminated) shoulder pain while gaining increased training effect from the additional range of motion. The improvements in joint centration as well as both lat and scap engagement, grooves the correct pressing patterns, automatically ensuring the proper engrams are programmed.
I simply won't use any other bar than the Duffalo bar to train with for myself or my athletes given the choice. In combination with the ShouldeRok it has been a 'Game Changer' in this Olympic training cycle.
- Reese Hoffa - 3x Olypmian in the Shot Put
A bare bar should only be used in non-humid environments and will require maintenance to keep it clean and rust-free.
Electroless Nickel- This is a premium finish. Nickel Plating is used in engineering applications where high wear, corrosion resistance, and hardness are needed. Nickel plating is both more cosmetically appealing than stainless steel as well as significantly more corrosion resistant in like products than stainless steel! Nickel plating is more durable than chrome and will retain it's warm, mirror smooth polish for years until worn through. In our application we believe Nickel plating to be both superior to Stainless steel in Cosmetic Finish, Corrosion Resistance, Surface Hardness, as well as maintaining the desired strength and material characteristics of our bar. We really believe if you are going to go with plating this is the option to go with.
Clear Zinc- The same corrosion resistant coating as the Shoulderok. Shiny and bright on arrival with a hue that varies from bluish to brownish. As the bar is used this coating will develop dull, gunmetal grey patina. Least expensive and most durable.
Black Oxide - Black oxide or blackening is a conversion coating for ferrous materials, stainless steel, copper and copper based alloys, zinc, powdered metals, and silver solder. It is used to add mild corrosion resistance, for appearance and to minimize light reflection. We particularly like the gunmetal black finish it gives to the Duffalo Bar. It just looks badass in our opinion!
Shipping a 55lb barbell (especially one that is not straight) is pretty challenging and not very cost effective. We've worked hard to negotiate better rates with our carriers and we think you'll be happy with the $ amount you are charged for shipping.
(we recently re-negotiated our shipping rates due to increased volume thanks to customers like you. As a result, you will see a savings of around 50% on shipping for heavier equipment like this product)
*Interest will be charged from the transaction posting date if not paid in full within the 6 or 12 months. Minimum payments required. Additional payments may be required to pay off balance before promotion expires. Klarna Credit accounts are subject to a potential $2 monthly minimum interest charge, credit approval and terms. Klarna Credit accounts are issued by WebBank, member FDIC.
Do you guys ship to Melbourne, Australia?
We do ship to Australia, however we can't send the bar via USPS priority mail international as they do not take items of that length. In order to ship to Australia you would need to select UPS worldwide expidited shipping.
I have question about the duffalo bar: I was thinking of buying a cambered bar, because of the longer range of motion. Does the duffalo bar do the same thing, or is it any better than a cambered bar?
If you're looking for a cambered bar I may go with the Transformer Bar, which gives you the loading capabilities of a cambered bar/saftey squat bar/plus many other loading variations. There is a bit of lead time for this bar, while the Duffalo is a great piece of equipment it will not provide the same stimulas as a cambered bar. Hope this helps.
Is the raw finish no longer an option on the Duffalo bar? I no longer see it.
We are no longer have the raw steel Duffalo as an option.
Is it good for Olympic style ass to grass squatting also. Mainly see people using it for low bar squatting.
The Duffalo bar can be used for all types of squatting. High bar, low bar, front squats, ect. The curve of the bar sits well over the traps and still reduces stress on the shoulder joint while minimally changing the way the bar loads the body compared to a straight bar.
Hey Chris! I've been contemplating this bar for a while now on my squat and bench. However, is there any application for military press or deadlifts?
There are absolutely military press applications. I've personally used it for that reason and find that you get the same shoulder centration effect. The deadlift, less so. It would put the wrists in position that would actually be the opposite of what it normally does and have unpleasant effects up the chain.
Hope this helps,
Kabuki Strength Coach
Agreed it is great for military press and incline pressing! It is used quite freqently for both. Some people use it for rowing as well by hanging chain weight in the center to make stay in the downward postion. This will improve scapular rectraction and range of motion in that movement. But for deadlifting it would not provide an advantage other than being similair to doing a small block pull. If the hands are to far out it would also negativily affecte the wrists as Brady noted. Orlando Green does like to use it for single arm deadlifts however.
What kind of oil is best to use when oiling the bar for future protection?
a 3 in 1 oil works best for the care of the bare steel/black oxide bars
Can the duffalo bar be stored upright?
Yes it can
What's the best way to care for the bare version of this bar? I've had mine for a little while now and just want to know how to safely keep it clean and relatively rust free for years to come.
The best way is to coat it with a thin layer of oil.
Can I use this during a meet Prep? Shoulders are banged up and would probably help to have this but is it too different from a straight bar to use leading up to a meet?
You can definitely use this during a meet prep!
Are there any black duffalo bars ready for shipment ? If not when will they be ready ?
Black Oxide bars are plated on an order-by-order basis. After you place your order it may take between 1-2 weeks for us to get the bar plated and shipped out to you.
Hello, Are there plans to update the Duffalo bar with the materials used in the new power/squat bars?
We''re changing the mounting system to snap rings just to consolidate part requirements but other than that there won't be any changes
Is the plating done before or after the bar is assembled with the bushings?
The plating is done before.
Can I avoid shipping charges by picking up bar in person?
Absolutely! Anyone is welcome to stop by The Lab and pick up their order in person! If you do so, wait until you get here and we'll place the order for you manually.
What finish to do you recommend if someone lives in a sub tropical environment? I live in QLD in Australia and it gets extremely humid. My Rogue Monster Lite Rack handles the weather like a dream but my main bar that I purchased form another company started to corrode within a matter of a couple weeks. Thanks to our terrible exchange rate with the US the Duffalo bar will set me back close to $1000 shipped...just want to make sure it lasts well.
The clear zinc and electroless nickel plating options will be the most corrosion resistant and will prevent the bar from rusting. The black oxide will prevent rust to a degree but is prone to rusting in more humid environments especially if there is not some type of oil on the bar to create a seal over the finish.
Who would normally workout with a 55lb weightlifting bar and can you by them from a regular sporting goods store? How can you tell the difference between a 45lb weightlifting bar and a 55lb weightlifting bar? Is it possible that the average person works out with a 55lb weightlifting bar?
The standard weight of an average barbell is 45 lbs, but plenty of specialty bars vary. Generally bars made specifically for squatting are 55 lbs. Really the only way to tell what a specific bar weighs is to weigh it.
does the bar sit fairly well on regular j hooks?
The bar definitely works just fine in regular J hooks. We use it in racks like this often and the only thing is that it has a propensity to slide to one side or another and can be adjusted before putting it on your back. If you have the style of J hooks that swing out to one side and pull straight out, if you swap the side of hte rack they are on (so that the hooks would swing in toward the center of the rack before removal) they will tilt and perfectly accomodate the curve of the duffalo bar
Does this bar fit kg Olympic plates . I know it fits pounds
Yes, it's a standard diameter sleeve for an olympic bar. It should fit regular plates as well as competition olympic plates.
Do you ship to Scotland in the U.K.
We do ship there. As noted on the product page for the Duffalo bar however we are unable to send it via USPS and can only ship it via UPS (worldwide expedited) being the cheapest option generally.
Which coating on the buffalo bar will prevent rusting?
The clear zinc and electroless nickel finishes are both extremely corrosion resistant and shouldn't rust. The black oxide is but to a lesser degree. Clear zinc and EN are both plating finishes where the black oxide is actually an oxidation that they apply to the bar. It's recommended to oil the bar from time to time to seal the finish in and it will stay nicer over time that way.
Could you send the bar to Hawaii? What would the cost be for shipping? And what coating would be the best for a humid climate even tho the bar will be indoors?
We do ship to Hawaii, contact email@example.com for a shipping quote. For that particular climate I'd suggest the Zinc or Nickel finish.
What is the total sleeve length (not only the loadable part)?
the total sleeve length in 17.5 in
Hi! How long does this take to ship? I’m going to order closer to Christmas, but definitely need it here prior. Thank you!!
For questions regarding shipping please contact us at firstname.lastname@example.org
When will the new duffalo bar with end caps and snap rings be available?
The updated vesion is currently live
I would need the exact cardboard package size of the transformer bar and the duffalo bar. Thanks a lot!
For any information regurding shipping questions contact us as email@example.com
good morning, how quickly could i acquire 2 bars? thanks!
You can contact customer service at firstname.lastname@example.org they can help you out with that
Hi, whats the shipping rate to Adelaide, South Australia for a duffalo bar? an estimation please
We slove to help with this question, email us at email@example.com
Hi, would you be able to export your barbells to India?
We can, email us to get an accurate shipping quote
Why do the sleeves have threaded holes in them?
Those are for the pins that hold the sleeves to the bar. We are updating the bar soon so they use snap rings and end caps
I live up in Vancouver BC Canada ...I have a home garage gym... I would like to purchase the black oxide coating ... will it weather ok up here ... similar weather to Portland ...
As long a bar with Black Oxide finish is in a climate controled environment there should be no issues. If that's not the case I'd suggest the Zinc or Nickel finish.